Thin Films Deposition for Researchers

university wafer substrates

Get Your Quote FAST!


 

 

Sputtered Metal Deposition

We understand how important quality is to you. Our sputter process has been designed to deposit ultra-clean metal and dielectric films. All wafer processing, including metal deposition, is performed inside our class 100 clean-room. An in-situ RF etch is added to the process to insure good film adhesion and ohmic contact to underlying conductive layers.

In addition to an In-situ RF etch, we can provide an HF-dip just prior to sputtering aluminum and aluminum alloy films. Adding this additional step can further increase ohmic contact between layers.

Sputtered metal deposition is an omni-directional process. For this reason, sputter deposition is not a good candidate for Lift-Off processing. If you are interested in metal for Lift-Off processing please see our E-beam evaporation metals page.

All sputter films are available on silicon wafers sizes up to 300mm in diameter. We can also provide sputtered films on non-silicon materials, including quartz and glass wafers. We offer a wide variety of sputtered non-precious metals, dielectric films, and silicon. Precious metals are available for E-Beam evaporation.

  • High purity Gold (Au) Target Purity 4N
  • High purity Silver (Ag) Target Purity 4N
  • High purity Platinum (Pt) Target Purity:3N5 and 4N
  • High purity Aluminum (Al) Target Purity 4N, 5N and 5N5
  • High purity Copper (Cu) Target 4N5 and 6N
  • High purity Titanium (Ti) Target Purity: 2N7 and 4N5
  • High purity Nickel (Ni) Target Purity: 3N5 and 4N5
  • High purity Tantalum (Ta) Target Purity: 3N5 and 4N5
  • High purity Tungsten (W) Target Purity: 3N5
  • Molybdenum (Mo) Target Purity: 3N5
  • High purity Silicon (Si) Target Purity: 4N, 5N and 6N
  • High purity Graphite (C) Target Purity: 4N and 5N
  • High purity Chromium (Cr) Target Purity: 3N5 and 3N8
  • Magnesium (Mg) Target Purity: 3N5
  • Germanium (Ge) Target Purity: 5N and 6N